Yuneec Typhoon H Spring Clip Replacement - iFixit 수리 안내서

소개

The guide instructs you to replace the spring clip or (also known as the arm clip) at the arm attachment on the Yuneec Typhoon H.

The spring clips usually get broken during a crash.

필요한 것

1 단계 Spring Clip

Yuneec Typhoon H Spring Clip Replacement, Spring Clip: 1 단계, 이미지 1/3

Yuneec Typhoon H Spring Clip Replacement, Spring Clip: 1 단계, 이미지 2/3

Yuneec Typhoon H Spring Clip Replacement, Spring Clip: 1 단계, 이미지 3/3

Using a JIS #00 screwdriver, unscrew the 3mm oval screw.
The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.

2 단계

Yuneec Typhoon H Spring Clip Replacement: 2 단계, 이미지 1/2

Yuneec Typhoon H Spring Clip Replacement: 2 단계, 이미지 2/2

For this step the arm must be bent.
Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.
The Blunt Nose Tweezers may be helpful in removing the arm clip.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Claire Luce

회원 가입일: 04/16/18

371 평판

안내서 2개 작성하였습니다

배지 +6개 더

팀

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 회원

CPSU-MANESS-S18S22G3

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

what function does the little screw have?

Ruud - 2018년 12월 23일 답글

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 5

전체 시간: 1,080