주요 콘텐츠로 건너뛰기

Sony WH-1000XM3 Battery Replacement

14 단계 번역중

14 단계
Sony WH-1000XM3 Battery Replacement, Remove the battery: 0 단계, 이미지 3개 중 1개 Sony WH-1000XM3 Battery Replacement, Remove the battery: 0 단계, 이미지 3개 중 2개 Sony WH-1000XM3 Battery Replacement, Remove the battery: 0 단계, 이미지 3개 중 3개
Remove the battery
  • Remove the battery.

  • Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

  • Remove old adhesive backings before installing new adhesive and clean the relevant areas with isopropyl alcohol (>90%).

  • If your replacement battery doesn't come with replacement adhesive, secure the new battery with pre-cut adhesive or double-sided adhesive tape (OEM adhesive is a 32x32 mm square). In order to position it correctly, apply the new adhesive into the device at the place where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.