주요 콘텐츠로 건너뛰기

Apple Watch Series 7 배터리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

14 단계 번역중

14 단계
Apple Watch Series 7 Battery Replacement, Remove the battery: 0 단계, 이미지 1개 중 1개
Remove the battery
  • Remove the battery.

  • Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing your old battery, you can reuse the existing adhesive to secure the battery during reassembly.

  • Secure a new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

  • During reassembly apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).

배터리를 분리하세요.

손상 또는 변형된 배터리는 잠재적 안전 위험이 있으므로 재사용하지 마세요. 새 배터리로 교체하세요.

재조립 중에 기존 배터리를 재사용하는 경우 기존 접착제를 재사용하여 배터리를 고정할 수 있습니다.

양면 접착 테이프 또는 미리-자른 접착 테이프로 새 배터리를 고정하세요. 배터리를 올바른 위치에 놓으려면 새 접착제를 배터리에 직접 바르지 말고 기기의 이전 접착제가 있던 위치에 바르세요. 새 배터리를 제자리에 단단히 누르세요.

재조립할 때 (>90%) 이소프로필 알코올을 사용하여 관련 부위를 닦은 다음 새 접착제를 바르세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.