주요 콘텐츠로 건너뛰기

소개

Prereq only.

부품

지정된 부품이 없습니다.

  1. Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.
    • Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.

  2. Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.
    • Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.

  3. Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone. Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.
    • Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.

  4. Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.
    • Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.

  5. Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone. Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.
    • Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

667,334 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 414