주요 콘텐츠로 건너뛰기

開口方法

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

2 단계
How to open the iPhone SE 2022 for repairs, Anti-Clamp instructions: 0 단계, 이미지 3개 중 1개 How to open the iPhone SE 2022 for repairs, Anti-Clamp instructions: 0 단계, 이미지 3개 중 2개 How to open the iPhone SE 2022 for repairs, Anti-Clamp instructions: 0 단계, 이미지 3개 중 3개
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

次の3つの手順では、デバイスの開講作業を簡単にするために開発されたツール、リバースクランプの使い方を紹介します。リバースクランプを使用しない場合は、この3つの手順をスキップして別の方法をご覧ください。

リバースクランプの詳細な使用方法については、 こちらのガイドをご覧ください。

青いハンドルを後方に引き、リバースクランプのアームのロックを解除します。

iPhoneの左/右側の端に向けてアームをスライドします。

吸盤カップを、ホームボタンすぐ上のiPhoneの下端付近に装着します。上部に一つ、下部に1つずつ取り付けます。

両側のカップをしっかりと押し付けて、取り付けたい位置に装着します。

作業中のデバイス表面が滑りやすく、吸盤がうまく装着できない場合は、梱包用テープを表面に貼ると、よりグリップ力を強めることができます。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.