물건을 수리하세요 커뮤니티 상점

Apple Watch Series 7 Akku tauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
독일어
8 단계
Apple Watch Series 7 Battery Replacement, Remove the battery: 0 단계, 이미지 1개 중 1개
Remove the battery

  • Remove the battery.

  • Do not reuse the battery if it has been deformed or damaged, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing your old battery during reassembly, you can reuse the existing adhesive to secure the battery during reassembly.

  • Secure a new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

Akku entfernen

Entferne den Akku.

Verwende einen beschädigten oder verformten Akku nicht mehr, das wäre ein Sicherheitsrisiko. Baue einen neuen Akku ein.

Wenn du den alten Akku wieder einbauen willst, kannst du ihn mit dem vorhandenen Kleber befestigen.

Befestige einen neuen Akku mit vorgestanzten Klebestreifen oder doppelseitigem Klebeband. Damit der Akku korrekt sitzt, solltest du die Klebestreifen an den bisherigen Stellen in der Uhr anbringen und nicht direkt. am Akku. Drücke den neuen Akku gut fest.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.