주요 콘텐츠로 건너뛰기

iPad Pro 12.9" 3rd Gen 배터리 교체

2 단계
iPad Pro 12.9" 3rd Gen Battery Replacement: 0 단계, 이미지 3개 중 1개 iPad Pro 12.9" 3rd Gen Battery Replacement: 0 단계, 이미지 3개 중 2개 iPad Pro 12.9" 3rd Gen Battery Replacement: 0 단계, 이미지 3개 중 3개
  • Pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt nose tweezers, and continue pulling—but don't pry under the battery.

  • If you removed all of the stretch-release adhesive, skip to this step. Otherwise, follow the next two steps for each battery cell with remaining adhesive.

스트립을 낮은 각도로 천천히 꾸준히 잡아당겨 빼내세요. 배터리 아래에서 스트립이 늘어나고 떨어질 때까지 충분한 시간을 주세요.

접착 테이프가 떨어지면 손가락이나 무딘 핀셋을 사용하여 다시 잡고 계속 당기되 배터리 아래를 비집지 마세요.

신축성 접착제를 모두 분리했다면 이 단계로 건너뛰세요. 그렇지 않은 경우 접착제가 남아 있는 각 배터리 셀에 대해 다음 두 단계를 따르세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.