주요 콘텐츠로 건너뛰기

Logitech G Pro X Superlight Füße tauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

2 단계
Logitech G Pro X Superlight Feet Replacement, Remove the feet: 0 단계, 이미지 1개 중 1개
Remove the feet
  • The feet are secured to the bottom of the mouse with strong adhesive. In order to cleanly remove them, the adhesive needs to be thoroughly heated.

  • Heat an iOpener and lay it on the mouse feet for one minute to heat the adhesive.

  • Alternatively, you can use a hair dryer on the Low heat setting to soften the adhesive.

  • If you're using a hair dryer, only heat the feet a few seconds at a time or you may warp the plastic shell.

Die Füße sind mit starkem Klebstoff an der Unterseite der Maus befestigt. Um sie sauber auszubauen, muss der Klebstoff gründlich erwärmt werden.

Erwärme einen iOpener und lege ihn eine Minute lang auf die Mausfüße, um den Klebstoff zu erwärmen.

Alternativ kannst du einen Haartrockner in niedriger Einstellung verwenden, um den Klebstoff aufzuweichen.

Wenn du einen Haartrockner verwendest, erwärme die Füße jeweils nur einige Sekunden, da sich sonst die Kunststoffschale verziehen kann.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.