주요 콘텐츠로 건너뛰기

iPhone 6のロジックボードの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

14 단계
iPhone 6 Logic Board Replacement: 0 단계, 이미지 3개 중 1개 iPhone 6 Logic Board Replacement: 0 단계, 이미지 3개 중 2개 iPhone 6 Logic Board Replacement: 0 단계, 이미지 3개 중 3개
  • Use the flat end of a spudger to lift the camera cable connector straight up out of its socket on the logic board.

  • Be sure to only pry on the connector not the socket itself or you can cause permanent damage to the logic board.

  • Fold the camera cable up out of the way of the logic board.

スパッジャーの平面側先端を使って、ロジックボードに付いているソケットからカメラ用ケーブルコネクターをまっすぐ持ち上げます。

ソケットではなく、コネクターを持ち上げるようご注意ください。ロジックボードに接触した場合、永久的なダメージを与える場合があります。

ロジックボードの邪魔にならない位置にカメラ用ケーブルを折り曲げて固定します。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.