주요 콘텐츠로 건너뛰기

iPhone 6のロジックボードの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

15 단계
iPhone 6 Logic Board Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the following screws securing the logic board to the rear case:

  • Two 1.9 mm Phillips screws

  • One 2.3 mm standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

背面ケースにロジックボードを留めてている次のネジを取り外します。

1.9 mmプラスネジー2本

2.3 mmスタンドオフネジー1本

スタンドオフネジを取り外す際にはスタンドオフドライバーもしくはビットが最適です。

ピンチの時は、小サイズのマイナスドライバーを使用してください。ーしかしながら、滑って周囲のコンポーネントにダメージを与えないように特にご注意ください。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.