물건을 수리하세요 커뮤니티 상점

Comment remplacer une chambre à air de vélo crevée sur un Trek 800

안내서로 돌아가기
영어
프랑스어
3 단계
Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 1개 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 2개 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 3개

  • Disengage the rear brake before you remove the rear wheel.

  • Pinch the arms to compress the brake cable.

  • Pull the cable out of the lever and it will fully release.

  • If your brake does not have a quick release (as shown in the picture) you may have to loosen the nut securing the brake cable to open the brakes.

Avant de pouvoir retirer le pneu arrière, il faut tout d'abord desserrer le frein.

Appuyez sur les mâchoires du frein pour donner du mou au câble de frein.

Tirez le câble hors de la mâchoire pour le faire sortir complètement.

Si vos freins n'ont pas de système de désengagement rapide (comme sur la photo), vous devrez alors desserrer l'écrou qui retient le câble pour pouvoir dégager le frein.

[* black] Disengage the rear brake before you remove the rear wheel.
[* black] Pinch the arms to compress the brake cable.
[* black] Pull the cable out of the lever and it will fully release.
-[* black] If your break does not have a quick release (as shown in the picture) you may have to loosen the nut securing the brake cable to open the brakes.
+[* icon_note] If your brake does not have a quick release (as shown in the picture) you may have to loosen the nut securing the brake cable to open the brakes.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.