물건을 수리하세요 커뮤니티 상점

Comment remplacer une chambre à air de vélo crevée sur un Trek 800

영어
프랑스어

안내서 정보

= 완료 = 미완료
Rear Tire Bike Tube for Rear Tire
How to replace a punctured bike tube on a Trek 800 bicycle
Trek 800 Bicycle Rear Tire Bike Tube Replacement
    If you noticeThere are many reasons why a bicycle tire may become flat. Often it is caused by running over debris or pumping up the tires too much. Punctures can create small holes that your bike tire is flat (andcan cause slow leaks whereas tires pumped up too much will cause if re-inflatingtdoesn't work or last long andhe inner tube to burst. When anything like this occurs, the inner tube needs ttire seemso be replaced. in a good state), you probably need to replace your bike tubeThis guide will demonstrate the process rand stepsequired to fix a worn o outr punctured bike tube on a Trek 800 model bicycle with no prior experience. After finishing, your bicycle will be ready to ride!<bikedel>

      안내서 단계

      1 단계

      Assurez-vous que votre pneu est à plat.

      2 단계

      Repérez sur le flanc du pneu la taille de chambre à air et la pression maximum possible.

      3 단계

      Avant de pouvoir retirer le pneu arrière, il faut tout d'abord desserrer le frein.

      4 단계

      Tirez sur le levier de serrage rapide du moyeu arrière.

      5 단계

      Retirez la chaîne du pignon.

      6 단계

      Retirez le pneu de la jante du vélo.

      7 단계

      Retirez la vieille chambre à air et mettez la neuve à la place.

      8 단계

      Remettez le pneu sur la jante.

      9 단계

      Remontez la roue sur le vélo. Remettez la chaîne et enfoncez bien la roue sur la patte prévue à cet effet.

      10 단계

      Resserrez le serrage rapide et bloquez le levier.

      11 단계

      Attachez de nouveau le frein.

      12 단계

      Gonflez le pneu à la pression préconisée.

      귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.