물건을 수리하세요 커뮤니티 상점

Comment remplacer une chambre à air de vélo crevée sur un Trek 800

안내서로 돌아가기
영어
프랑스어
10 단계
Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 1개 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 2개 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 0 단계, 이미지 3개 중 3개

  • Make sure the skewer is completely inserted into the frame slots before tightening.

  • Rotate the skewer cap clockwise and ensure a snug contact between the skewer caps and the frame slots.

  • Rotate the skewer lever towards the bicycle frame.

  • If the skewer lever is too difficult to twist towards the frame, back off the skewer cap until you can twist the lever towards the bicycle frame and it feels snug.

Resserrez le serrage rapide et bloquez le levier.

-[* black] Tighten quick release lever and lock.
+[* black] Make sure the skewer is completely inserted into the frame slots before tightening.
+[* black] Rotate the skewer cap clockwise and ensure a snug contact between the skewer caps and the frame slots.
+[* black] Rotate the skewer lever towards the bicycle frame.
+ [* icon_note] If the skewer lever is too difficult to twist towards the frame, back off the skewer cap until you can twist the lever towards the bicycle frame and it feels snug.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.