주요 콘텐츠로 건너뛰기

How to Replace a Rear Brake Cable

9 단계
How to Replace a Rear Brake Cable: 0 단계, 이미지 3개 중 1개 How to Replace a Rear Brake Cable: 0 단계, 이미지 3개 중 2개 How to Replace a Rear Brake Cable: 0 단계, 이미지 3개 중 3개
  • Flip bike back right-side-up.

  • Slide the connector up near the housing holder. About an inch between the connector and holder should be fine.

  • Using the smart wrench and 10mm socket wrench, tighten the nut so it grips the brake line firmly.

  • Using wire-cutters, cut the extra cable so only about an inch remains.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.