주요 콘텐츠로 건너뛰기

How to Replace a Rear Brake Cable

10 단계 번역중

10 단계
How to Replace a Rear Brake Cable: 0 단계, 이미지 3개 중 1개 How to Replace a Rear Brake Cable: 0 단계, 이미지 3개 중 2개 How to Replace a Rear Brake Cable: 0 단계, 이미지 3개 중 3개
  • You can recycle the old brake cable for this.

  • Insert the end of the brake cable with a "nub" into the slot on the rear left brake.

  • Slide the cable onto the slot on the connector.

  • Slide the other end of the cable into the holder on the right rear brake.

  • Pull the cable to clamp down the brakes so they almost touch the rim of the wheel.

  • Tighten the screw so the cable does not come loose.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.