Nest Dropcam Pro LEDs Replacement

영어

한국어

3 단계 번역중

3 단계

Using a de-soldering tool, disconnect the LEDs from the motherboard.
If you don't know how to solder, check out How To Solder and Desolder Connections.
Soldering irons are extremely hot and can burn you if you touch them!
If you hold the soldering iron tip at the same spot for too long, it can strip the metal from the plastic board. You may not be able to solder wire to that point again.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.