What is the solution of camera error flash to need to cool down?
The camera didn't open after message flash to need to cool need.
평판이 20이상 되는 사용자는 문제적인 댓글과 게시글을 지적할 수 있습니다.
세부 사항 보기
게시일:
The camera didn't open after message flash to need to cool need.
평판: 221.4k
게시일:
There is a thermistor near the camera that detects the temperature. When the temperature is too hot, it signals to the CPU and you get the message.
Do you feel any excess heat around the camera?
You could have a defective camera module, which is pulling too much current and hence generating heat. It could also be a problem with the voltage regulator that supplies voltage/current to the camera.
The easiest thing to try is to disconnect the camera, first both of them then one at a time, to see if that solves your problem. You would then order a replacement camera.
If you still get the message without any cameras connected, then you probably have a logic board problem.
아차! 마음을 바꾸겠습니다.
1 페이지 중 1