주요 콘텐츠로 건너뛰기
« 모든 스토리로 돌아가기

LCD backlight was dead.

louislongchamps -

스토리 이미지
  • 이미지 #1
  • 이미지 #2

내 문제

After one minute or so, the backlight was turning off, probably because of overheating.

나의 수리

I ordered a LCD for my MacBook A1181 and I replaced it without removing the panel. It was a little bit tricky to plug it in the inverter, but watching at pics (Fig.1) of the inverter helped a lot to know where I was going to plug it.

내 조언

Buy one extra bezel mounting clip in case. I was not able to put the bezel back in place so I removed every gray mounting clip from it and clipped them on the LCD mount (Fig.2) before to clip the bezel in place. This was the only way I could do it without destroying all clips.

Spudger 이미지
Spudger

$3.99

Phillips #00 Screwdriver 이미지
Phillips #00 Screwdriver

$5.49

MacBook 13.3" LCD Panel 이미지
MacBook 13.3" LCD Panel

$49.99

« 모든 스토리로 돌아가기

댓글 0개

댓글 쓰기