If your Watch isn't turning on after charging, here are some steps you can try to troubleshoot the issue: Check the Charger and Cable: Ensure that the charger and cable are functioning correctly. Try using a different USB cable and charger if possible. Charge Longer: Leave it plugged in for at least 30 minutes to an hour. Sometimes the battery might be too depleted to power on immediately. Force Restart: If the watch is unresponsive, try a force restart: Hold the power button for about 10-15 seconds until the watch vibrates. Software Issues: If it powers on but doesn’t function correctly, it might need a software reset or update. You can do this via the companion app on your smartphone.

If you've forgotten your BitLocker password, there are a few steps you can try to regain access to your drive: Recovery Key: When you set up BitLocker, you were prompted to save or print a recovery key. Check for this key in your Microsoft account, saved files, or printouts. Recovery Drive: If you created a recovery drive on a USB stick, you might be able to use it to access your data. Backup: If you had any backups of your data, you might need to consider restoring from those if the recovery options don't work. If none of these options are available, you may need to consider data recovery services or accept that the data may be lost. Always ensure to keep recovery options backed up for the future!

Check if fuse is popped, if it is then replace it, if the fuse not case then, lights might have burned out which needs to be replaced.

If you forgot the password and you don't need any data from the computer, then you format the drive and fresh install the OS.

Propellers you trying to replace are they identical with ones you took out? If they are the same ones and doesn't go easy then you can use little wd40 it will slide in easily.

When you brake it does not go on changing, your battery might old, so it shows wrong information on display.

It is better if you have bracket, that prevents undo the connections from motherboard when phone drops accidently. Without bracket phone will function, but wouldn't recommend it.

Check if the OS and its patches are up-to-date, if this doesn't resolve the issue then reinstall the OS.

LCD might be defective…if you see your phone on find my phone, if not then there might a short on the motherboard causing the phone not to turn on.

Registry might be corrupted, only fix is doing the hard reset, by freshly installing the OS.