Saltwater drop / Rear LCD not workingHi all, I recently had my GoPro in saltwater as I hadn't realised/checked that the wrong back door was on. I had imediatly...
"How can I replace the touch screen?"에 답변You might want to read my additional comments in my topic: Saltwater drop / Rear LCD not working
"Saltwater drop / Rear LCD not working"에 답변Seems like its not the LCD in my case. I did a full strip down of the Hero 4 and could see no PCB damage from the saltwater. All the components were fully dry with no signs of residue. My first attempt lead me as far as removing the back LCD housing as I was unsure how to remove the LCD from the housing. I couldn't find any vids, pics or anyone that had tried. I did think I was at a dead end but a week later I took the plunge and bought a new LCD. Removing the LCD is very tricky as there is a metal clip locking the battery compartment in which has to be removed first before you can access the LCD. When you have freed the clip plus the two screws a hinge is also holding this down and runs along the bottom so you need to pry this too, this can be very tricky. Once all those are free the battery compartment can be removed straight up. The LCD is stuck down by strong adhesive and took allot of force to push this through from the inside. As I did this I didn't realise the LCD on/off button is hinged in its slot...