Not that difficult……… if you are having trouble, search youtube for basic solder / desolder videos.

Same principles apply to micro usb ports on many devices. It much easier to remove old port using hot air rather than a solder iron

I would add… “Be careful taking these type of connectors apart” …. its easy to pull the entire thing off the motherboard and rip pads !

The pulled pads can be replaced but its extra work you don’t need :-) and requires equipment and skill to do and cold require jumper wires.

If you are just replacing the screen, this is wrong. This would help if you are replacing with a “screen in frame”

main reason for changing it is a worn out or loose charge port

Make sure you buy the correct charge port assembly......... some models just have the one antenna cable (blue) and some have 2 cables.

the blue one and a white one. If your phone has 2 cables and you use the assembly with just 1....... you may get poor cell reception.

Pry up on the connector to remove the camera before trying to lift motherboard