The Code Should Be 049. if that one doesn't work then go to the website I put here: https://codesforuniversalremotes.com/uni...-remote-control-codes-sanyo-tvs/
I have had this problem with my TV, I tried a factory reset on the TV the lines went away for about an 1hr then they returned so you should try that and see what happens. If that doesn't work try and see if there are any cords loose on your TV or your cable box. If that doesn't work then you might need to get a new TV. Hope this helps. Best Of Luck!!!!
I have had a similar problem to this. All I had to do was take the SIM card out then turn off the device wait about ten minutes turn it back on then put the SIM card back in and it had no problem after that. Hope this helps. Best of Luck!!!
There is a lock switch on the side of an SD card it prevents it from going all the way in. If that is not the problem you might be also putting it in the wrong way. Hope this helps. Best of Luck!!!!
Did you drop it or something or is it that they are just out of alignment. Here is a telescope guide, I hope this helps. Best of Luck!!! Telescope Teardown