Make sure you update to the latest printer driver. Printer manufacturers offer updated drivers to improve compatibility with newer software, such as newer versions of Adobe Reader DC. If you have a different printer connected to your computer, try printing the file to the other printer. Sometimes a different printer can successfully print a PDF that doesn't print on another printer. Software-related solutions Restart your computer Restart your computer, then open the file again. It is surprising how often simply restarting your computer solves a problem. Otherwise you can just try an Adobe Reader DC alternative, such as SwifDoo PDF.
Monitor turning off while you are actively working means that either your system is very confused on power management and told display to go to sleep, or GPU/PSU is having some problems. Several issues can cause a monitor to turn off randomly. Some of the reasons relate to the monitor while others relate to the computer. (1) Monitor overheating (2) Loose cable (3) Bad monitor (4) Video card or motherboard problem You can just troubleshoot these components and fix it accordingly.
Don’t invest any more time in formatting, drivers, or anything else within the O/S until you’ve already ruled out it’s not a software/hardware issue. There are specific components between your power adapter and the motherboard which make decisions about charging and using your battery. My best guess is that there is a hardware issue in one of these components. If your laptop has a built in hardware diagnostic tool you can try running that, but they have limits on their effectiveness. Some potential options if you still want to try some things - Update firmware on laptop - Try power adapters rated for higher wattage - If the power-port on the motherboard is removable, you can try replacing that one part and see if that's the culprit.
If you can remove the laptop battery, do so, unplug the power, and press and hold the power button for about 20-30 seconds with nothing else plugged in. This will drain the flea power off the system. Once you've done that, put the battery back in, plug it back up and try to turn it back on and see what happens. If you can't remove the battery, unplug it and press and hold the power button for 1 minute with nothing plugged in and repeat the same steps above. It's important to not have anything else plugged in during this time like an external keyboard, mouse, monitor, etc. as we want only the charger and the battery to be the source of power for the unit. If the drain residual electricity way is not working in your case, please kindly check out some posts of Methods For Fixing My HP Laptop Won't Turn On.
Vertical colored lines usually show on a TV screen when the T-Con board is not working properly. Many times this can simply be caused from wiring that is not securely fastened. Other times the T-Con Board itself may be faulty and need to be replaced. This doesn't always mean that the TV is broken. And there are a number of tips that you can try to solve the problem. Tip 1: turn the TV off and on. Tip 2: check the video cables. Tip 3: switch between sources. Tip 4: update the software. Tip 5: reset your TV to factory settings. I hope my answers comes in handy for you.
Kindly follow the tips below and see if it works. 1. Power off the laptop. 2. Power on the laptop. 3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off. 4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen. 5. Now you want to let the laptop boot to the "Automatic Repair" screen. 6. Click "Advanced Options" and then select "Troubleshoot". 7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system. 8. From here just follow the screen instructions until the recovery is completed. NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost. Do not do a "Reset" as that will wipe all data you have on the laptop.
All wireless mouse issues can be addressed with one or other of some most common fixes. If the mouse looks fine, reboot your computer to see if it recovers the mouse and begins working properly again. If it no working. Check that the USB dongle is in place and hasn’t been moved or shifted out of position. Optionally, remove it, wait a few seconds and put it into a different USB port. The best way to test that theory is to use a different computer, try the mouse somewhere else. If it worked fine and suddenly stopped working and nothing else has fixed it, it could be a hardware issue.
All electronics have safe operating temperature ranges. If your game console has been in extreme temperatures, let it return to room temperature before turning it on. The rechargeable battery inside your device may experience shorter run times after exposure to high temperatures.
Check in Bios if you still see your Windows Drive (Your SSD). If your Drive is still visible make sure that the drive is set as 1st boot device and then boot directly onto the drive also make sure that the drive boot order is set as 1st boot order. If that doesn't work and still facing the issue, you can just make a bootable USB device and try to repair the windows on the drive. You can also try to reset your Bios and see if that would help.
Here are options you could try -reinstalling the battery may not be connecting correctly -recalibrate the battery -see if there are updated drivers for detection on Lenovo website. Otherwise there is the chance that you have a defective battery.