TheYootz Media Group

The board has 1GHz BCM2835 single-core processor, would there be any processor upgrades for this?

So, my friend came with his iPhone 4, and I had a guest WiFi set up, but we were only 15 ft away from the router when the con...

My iPhone 6 has gotten water damaged, the SIM indicator is red. It stopped working for a while, and now it is restarting rand...

My iPad Mini’s headphone port stopped detecting headphones after attempting to plug in a 2.5 mm headphone jack. Any suggestio...

Is there any way to make the back clear, or is the back metal cover not removable?

I inherited an iPhone 4S from family, but the home button does not work. It clicks and feels right, but it is a pain whenever...

There is a red water damage indicator underneath the sim tray, is there any chips below the board that might be damaged?

My iPhone 4S recently has started muting/unmuting recently. Is there any way to repair this issue? It sometimes gets unmuted ...

I was wondering if the board from the iPhone 4S would be compatible with my iPhone 4. I’m not completely sure, so I’m coming ...

I dropped my Dell Inspiron 910 and it landed open, looking like a roof. I broke off 2 parts of the snaps on the rear cover, a...

Yes, they are, because they are the standard bits and driver included in iFixit toolkits, just without all the bits.

That is a trackpad/mouse, most likely the trackpad connector.

iOS 6 is not signed for iPhone 4, only iPhone 4S and iPad 2. Sorry.

For the trackpad, check for any bluetooth mice. That happened with me.

It’s hardware related, and no, a battery won’t normally start causing overheating, but it could possibly be an issue to this. If your phone has never been opened, you might not want to do this as you will lose your IP67 water rating. But, if you wish to lose this, I mean, if you would rather lose this rating for trying to fix the problem, go ahead. This could also be the problematic Audio IC chip found with many iPhone 7 devices. Another option: You can trade your phone in for a new iPhone 7 for as low as $200 from Apple with Apple Give-Back if you wish to skip the hassle of repair. Links to stuff included. iPhone 7 Replacement Battery

Either a problem with your jack, or the songs are low quality.

For starters, make sure your controller is actually paired with the device. If it is and it isn’t working, make sure that the controller’s batteries aren’t dead. Then, if that isn’t happening, then it is probably something wrong with the chip that accepts the frequency from the controller. Hope this helps!

All you will have to do is go into the device and screw the screws that hold in the display back in, and this will fix your problem completely.

Please note that MacOS doesn’t natively support touchscreen displays, well, at least not for the touch option. So, you would have to find a tweak that would enable this, or it wouldn’t work anyways. Now for the actually answer after my little roast on MacOS for being not touchscreen display compatible lol. So, for the soldered connections, there is really no space to install a slot for a stick of ram, which is how they crammed all of the power into the laptop. The only way to upgrade the CPU is to have micro-soldering skills, and a CPU compatible with the socket and the model identifier. For the GPU, it is soldered to the board like the CPU, and you would have to have a GPU compatible with the socket and the model identifier. So, in conclusion, there is really no way to install a ram slot in the place of the soldered ram, and the CPU is pretty much limited to CPU’s compatible with the model identifier, e.g MacBookAir7,2, but with a Pro instead of Air.

The iPhone has IP67 water resistance, not the case. There is most likely a short.

The screw is stripped. What should I do?

Your connector or socket may have broken. Open the Mac and check if you missed something.

@sam I noticed that you forgot one step, the display retainer brackets on the case. If people don’t transfer this over, the display won’t stay in!

Well, you could buy a Dotterpod iHold, which would hold the display up, which would allow you to keep the screen attached.

If you already have the digitizer taken off, this would be really easy, as you would just have to remove the LCD, and there you go, you can remove the camera and replace it.