Anyone have a method to drain the water tank for the model K70?

PS. The battery change was a success, but the patient is still ill. The start-up still screen loops over and over, and hard reset does not work. Any ideas? Dave B

A further comment about the two connections for first timers would be helpful. The battery cable connection comes straight up and reconnects nested directly straight top down into the female socket. Unfamiliar with small thin video screen cables especially in teh1 to 2 inch working space, I could not understand why the cable would not ‘Plug” in. Eventually I realized that it was a clamp type connection and that the clamp was closed. After I flipped it open, I was able to hold the ribbon in position and flip the clamp closed. I’m glad for the experience, otherwise it would not have seem such an accomplishment for such a simple connection. Do you have a primer that describes these basic procedures? Also, how do you “follow the step in reverse order” with respect to the glue strips, and what is the record measurement for the length you can pull these strips? I got to at least 9” before it let go.

Thanks for the help. Dave B

This method is fine if you you have a fully functioning Kindle. If you are locked in a start loop, ie can’t get to a full start up. power off the kindle, wait 40 sec, push and hold power on button and the left (volumn down) button until the Options list appears. use the up vol button to select down the list highlighting the selection. initiate the selection with a push of the power button. I suggest a soft reset before a reset to factory, and back up your data usually on a removable chip, and remove it prior to reset.