시간당 평판
평판 내역
이벤트 | 개수 | 델타 |
---|---|---|
관리자가 귀하의 안내서를 승인하였습니다 | 1 | 100 |
누군가 귀하의 안내서를 완성하였습니다 | 3 | 90 |
게시물이 추천되었습니다 | 7 | 84 |
답변 승인함 | 2 | 60 |
승인된 답변 | 1 | 10 |
누군가 귀하의 안내서를 좋아요 하였습니다 | 1 | 10 |
이벤트 | 개수 | 델타 |
---|---|---|
관리자가 귀하의 안내서를 승인하였습니다 | 1 | 100 |
누군가 귀하의 안내서를 완성하였습니다 | 3 | 90 |
게시물이 추천되었습니다 | 7 | 84 |
답변 승인함 | 2 | 60 |
승인된 답변 | 1 | 10 |
누군가 귀하의 안내서를 좋아요 하였습니다 | 1 | 10 |
F2 code usually means a drain issue… it could be as simple as the drain hose being inserted too far into the drainpipe connection… or it could be the drain hose is clogged with something. It might be a stuck water pressure switch… it is attached to the inside wall of the washer. You may have banged it while servicing the CCU. Try tapping it GENTLY with the handle of a screwdriver. The only other thing that comes to mind is a clogged drain pump filter.
I used this Guide to replace the zipper slide on my wife's favorite Disney fleece jacket. I purchased my slide and the stop online. Since I'm not sure about the rules on posting vendor's info, I will say GOOGLE "nylon coil zipper slide". You can have your "zippershipped" right to your door.