Just a simple guy who’s always been interested in learning as much as I can, to be as independent as I can. Along the way learned a lot, and always enjoy sharing whatever I know that might help someone. Don’t know it all, and not always right, but sometimes I just might be able to help. I can be contacted at caowensr@gmail.com.
I’m a 1959 model/native and current resident in the upstate of South Carolina. Made my bones in Textile manufacturing, as a Dyer. Always loved chemistry, though not well or at least not formally educated. The exodus of textiles took me into the chemical domain where I enjoyed my most fascinating career experience working with hazardous chemical and other waste. Reaganomics, TORT reform, and the pollution liability conundrum in 1987 put an end to all that (for me).
Along the way, the turbulence encountered with unemployment disruptions returned me to my default as an independent woodworker and handyman type, as being married with three beautiful boys meant I had to produce, regardless of sob stories.
The internet explosion opened up the world’s ultimate library to me, and in mid-life I began soaking up everything of value I could. I wasn’t born with a wrench in my hand, and only acquired a broader mechanical base in the last couple of decades. Sorry to say I’m virtually worthless when it comes to all the latest electronics and media devices.
Finally, for the record, even though I don’t know how everything works on this site, so far it’s been a lot of fun. Helps keep me on my toes, and always learning, still.
Avatar image is actually tribute to my Son, Charles, 1985-2016. He and I spent the last few years leading up to his passing working together, and he is sorely missed. Also included image of the family, and the grand-kids, as this is what it’s always been about, anyway.
답변
-
"Whirlpool Duet Washer, No water Dispensing for Bleach area?"에 답변hey micanushi. Wonder if there’s an issue with the central control unit dispenser circuit pins or harness that’s compromising dispensing signal during the wash cycle? Have you done a visual inspection or tested continuity on the CCU? Also, found an outstanding service manual for your model that you can download in pdf. https://www.applianceblog.com/manuals/Du... Good Luck & please keep us updated.
-
"no fuel to carb new fuel pump and vac hose"에 답변Hey FLOYD. let us know if you are getting fuel through the fuel line/hose where the line connects to the carb. And can you provide your mower model number and the engine information?
-
"starter start correctly - put in gear all OK - put back on park or neu"에 답변Hey Roland. Thanks for the clarification. Found something that could be helpful to you. Simply do an online search for: ricksfreeautorepairadvice.com\starter-runs-continuously Hope this might help. Good luck.
-
"rider boggs down after 10 minutes of cutting"에 답변Hey Sam. Here’s some assumptions I’m making: blade is sharp & balanced & securely mounted correctly, deck adjustment is level, mower drive belt is correct size & routed properly, & tires are properly inflated. Also, your problems do not include the mower actually stalling out, but simply the performance drops off after a few minutes of mowing, and is otherwise ok. If the engine is making sufficient power, that power is delivered to the drive system. If you then lose power, the loss must be coming from resistance, slop or damage, etc., with some drive system component, it would appear. You can check your blade (mount) & pulleys for damage, resistance, slop, etc., and check the blade brake and disc brake for proper operation. Along with the assumptions stated above, this looks at most everything in that system except for the motion drive belt and the actual trans-axle. Careful not to exclude that motion belt, as this could be a player in your situation. Then again, your problem starts not when you engage the...
-
"Lost power with charged batteries. Charger keeps you going on and off"에 답변Hey Anthony. Sounds like that battery’s had it. If you take it your local Napa, Advance, Pep Boys, etc., they will be able to test it and determine if there’s a dead cell, etc. If your battery can be recharged and then hold a charge then your charger isn’t working right or being operated correctly. Also, you may want to go over the relevant wiring on your cart and look for damage, loose or corroded connections, etc. Good Luck.
-
"Getting rid of mould on my carpet"에 답변Hey David. A lot of people use bleach to get rid of mold and mildew that forms on bathroom walls and exterior siding. But, in my experience, Mean Green makes a product called Mildew Destroyer that is absolutely awesome. I found it at Dollar General stores in a spray bottle. It’s powerful stuff, and also has some powerful fumes you don’t need to breathe. Use a half mask respirator with chemical cartridges capable of protecting you from Chlorine vapors, if using indoors or confined spaces. Also, you may want to test this stuff on just a small spot first to see if this product is safe to use on your carpet without changing the colors. Hope this helps. Good Luck.
-
"Why does it overheat"에 답변Hey lucianaherber. In addition to oldturkey03 comments, just wondering if this engine has been running with a bad coolant blend. Running the engine using primarily tap water and/or not enough coolant/antifreeze in the mix has the engine running hotter and allows rust to form and deposit throughout the system, and potentially obstructing passages and the coolant flow from circulating as designed. Using different coolant/antifreeze formulations (like the green mix and the orange mix, for example) can result in a thickish goo forming in the coolant system - not good. If either of these applies to your situation you would want to perform a series of engine coolant flushing exercises to try and clear the passages, etc., then recharge the system with the right mix of the right type of coolant (and don’t forget to “burp” the system when you’re done. Good Luck.
-
"shuts off after 30 min"에 답변Hey jdcm1. Make sure the fuel line is clear and fuel filter is not clogged. Test the fuel shut-off solenoid (and the wiring harness) mounted on the bottom of the carburetor. Check the coil package (and related wiring) to ensure you’re getting spark.
-
"Help 4l60e constant shifting"에 답변Hey Lee. Could be throttle position sensor issue (harness and/or wiring included). Throttle plate could have carbon buildup around it’s edges, as well. Also make sure vacuum lines and connections are sound. Hope this might help.
-
"1992 corvette won’t start. Cranks OK...But has no SPARK!"에 답변Hey Herb. The gut wants me to say your problem resides within the ignition module, control, and/or coil. However, this assumes many facts not in evidence. You would need to perform the appropriate diagnostics to track down your issue. If you have the knowledge and experience, and an automotive diagnostic system (picoscope, etc.) you could do this on your own. Otherwise, it’s best to put it in the hands of a qualified service pro. Good Luck.
