내가 기여한 안내서
완성된 안내서
질문
-
partial power, sound/s but no lightsMy local game store asked me to look at a Xbox 360S Halo 4 edition. They had a customer give them the console. Customer state...
-
External USB dvd drive not being recognizedI bought an external DVD drive to use with the Surface Pro. Sometimes the Surface recognizes the drive under My Computer, som...
-
will not turn on, red lightI have a Wii in for repair. When I plug it in, red power light comes on. Try to power it on, red power light goes out, blue t...
-
replace cracked iPad 2 screen with iPad 3 screen?I have an iPad 2 in for a digitizer replacement. I have a couple iPad 3 digitizers on hand. Can I use the iPad 3 digitizer on...
답변
-
사용자에게 답변하기: My ps4 won't start up?Before just saying it's this or that, try the easiest troubleshooting repair by replacing the power cord. Then look for a local shop to fix it. They may be able to fix it faster than returning it to Sony.
-
사용자에게 답변하기: Loca or oca for replacing glass?As cheap as the complete glass/LCD assembly costs, don't waste your time trying to replace just the glass. You'll put more into all the extra glue and machines than it is worth
-
사용자에게 답변하기: Which parts to replace for disc read error?Yes, the laser is the only thing that needs to be replaced the majority of the time. Follow the directions on this site. The lasers run $12-$13
-
사용자에게 답변하기: My Optical Drive is Failing, Do I Replace It or My Xbox?Please try just replacing the laser, not the entire optical drive. You can t just swap drives. The drive is locked to the motherboard. You would have to strip the drive key off the drive circuit board and install it on the new one. A lot of hassle and knowledge to do that. Anybody can replace the laser.
-
사용자에게 답변하기: open tray error plz helpYou can't just replace the optical drive. The drive is keyed (locked) to the motherboard. First start with replacing the laser. This is the easiest and cheapest step. Anyone can follow the guide on here to swap the laser. If that doesn't work, there may be an issue on the drive circuit board and that is harder to diagnose. To put a totally new drive in the console requires you stripping the key off the drive circuit board. This involves software, compatible computer and cords. Not something you should attempt if you're not computer savvy.
-
사용자에게 답변하기: Need help finding where an aluminum part goes on PS3 SlimIt would be helpful if you posted picks of the parts
-
사용자에게 답변하기: Where is this part located?These are two separate pieces. The smaller one goes along the front edge of the console on the bottom casing, under the disc drive, under the motherboard. Flip it around until you see how it aligns on the casing. The larger piece goes along the right edge, on the bottom casing under the motherboard. It attaches on the right side about 2 inches from the front leading edge and rests on the bottom of the casing.
-
사용자에게 답변하기: Why won't my PS3 Super Slim turn on?Try this. Turn off the system. Unplug it. Plug it back in. Attempt to turn on and watch the lights closely. If the red light turns green for a split second and then flashes a yellow light for a split second, and then blinks red, you have the Yellow Light of Death (YLOD). Just follow the instructions found on here for the YLOD repair.
-
사용자에게 답변하기: help on repairing/rebuilding my iPhone 4.Looks like a frame does when you do a screen replacement. Should work.
-
사용자에게 답변하기: The piece I plug into to charge has come loose inside.Fix?I would guess it is soldered to the circuit board. If you don't have experience soldering, the repair may cost more than a new tablet.
안내서 댓글
활동 시간
지난 90 일 동안 귀하께서 활동한 시간대 입니다. 이 그래프의 각 행은 귀하께서 사이트에서 수행한 작업을 나타냅니다 (투표 및 게시물 편집과 같은 주요 활동만 집계합니다). 도표 하단의 숫자는 산악 표준 시간 입니다.
시간당 평판
평판 내역
이벤트 | 개수 | 델타 |
---|---|---|
게시물이 추천되었습니다 | 64 | 768 |
답변 승인함 | 9 | 270 |
승인된 답변 | 1 | 10 |
누군가 귀하의 안내서를 완성하였습니다 | 1 | 3 |
게시물을 비추천하였습니다 | 1 | -2 |
게시물이 비추천되었습니다 | 1 | -6 |
배지
740459
최근 알림
읽음으로 모두 표시
Show:
전체
전체
읽지 않음
모두 읽으셨군요! 새로운 알림은 없습니다.
-
Tanicia acker님이 귀하의 "ps3 wont read disk" 답변에 댓글을 달았습니다.
-
인기있는 질문 배지를 획득하셨습니다!
-
Kaylyn Holmes님이 귀하의 "PS3 makes 3 beeps then shuts off" 답변에 댓글을 달았습니다.
-
trevorkiller님이 귀하의 "PS3 makes 3 beeps then shuts off" 답변에 댓글을 달았습니다.
-
krisep님이 귀하의 "Phone fell, no visible damage, doesn't turn on" 답변에 댓글을 달았습니다.
-
Deandre님이 귀하의 "ps3 wont read disk" 답변에 댓글을 달았습니다.
-
Trini님이 귀하의 "ps3 wont read disk" 답변에 댓글을 달았습니다.
-
@thytiger님이 'will not turn on, red light'에대해 답했습니다.
-
Miguel Agosto님이 귀하의 "Is it possible to buy the digitizer only?" 답변에 댓글을 달았습니다.
-
Striker님이 귀하의 "Won't turn on, but makes a beeping sound." 답변에 댓글을 달았습니다.
-
mathewyazvac님이 'ps3 wont read disk'에 대한 귀하의 답변을 받아들였습니다.
-
slenderman221님이 귀하의 "Won't turn on, but makes a beeping sound." 답변에 댓글을 달았습니다.
-
Andrew Leonard님이 귀하의 "Why can't I turn on safe mode in my ps3 super slim?" 답변에 댓글을 달았습니다.
-
russellglennwong님이 귀하의 "Touch screen problems after screen replacement" 답변에 댓글을 달았습니다.
-
안녕하세요, Wade님! 더 나은 ifixit 사용 경험을 원하시면 고유한 사용자명을 선택하십시오!
-
Subba님이 'PS3 makes 3 beeps then shuts off'에 대한 귀하의 답변을 받아들였습니다.
-
Tylor님이 귀하의 "Won't turn on, but makes a beeping sound." 답변에 댓글을 달았습니다.
-
JJ님이 귀하의 "ps3 wont read disk" 답변에 댓글을 달았습니다.
All the immature comments aside, thank you Dustin for sharing the information.
Because there is no stress on the ribbon cables if you remove the screen. You’ll be moving the phone around trying to remove the adhesive, which would introduce the possibility of damaging the ribbon connectors.
Anybody have a solution to the front facing camera assembly not working? Changed out my buddies battery and now the front camera and ear speaker don't work.
This guide needs to be changed to Difficult. Removing the screen without breaking it will be challenging. If you are successful after that, the rest is easy.
Are steps 22-25 necessary just to replace the display?
I have to ask the same question. If just the glass display is broken, and you're heating it up to remove the glass, is it really necessary to remove everything? Doesn't like like it is necessary
You will need to pull back the anti-tamper seal along the rear left corner.
LOL! Love the guide, but could a bit more info.
I see some great results here. But I'm amazed everyone would remove the glass that is bonded to the whole LCD with LOCA glue, to reinstall the new glass with 3M tape along the borders.
This step is not needed.
2 페이지 중 페이지 1
다음