Sony Ericsson T68i Troubleshooting

This covers the Sony Ericsson T68i released in 2001. Note that any or all of these problems could be caused by a faulty or damaged logic board. Therefore, you should refer to the logic board repair guide if you've exhausted all other options.

Recharge or replace the battery.

If the battery has not been used for a long time or is completely drained, it may take up to half an hour for the battery icon to appear on the screen.

You can change the menu language to automatic on your SIM card by pressing ← 8888 → in standby. You can also change it to English by pressing ← 0000 → in standby.

There is no SIM card in the phone. You must insert a SIM card.

If you entered your personal unblocking code (PUK) incorrectly 10 times in a row then you must contact your service provider.

Your phone is locked. You must unlock it with the 4- or 8-digit code. The default code is "0000".

The battery you are using is not an Ericsson-approved battery and is charging slowly for safety reasons.

This mostly likely indicates a damaged LCD screen. See our screen repair guide for removal of the screen.

A damaged or faulty logic board: see our logic board repair guide for removal of the logic board and check board for signs of damage.

Be sure that your volume is up and that the phone is not on mute or vibrate.

Your speaker might be damaged or disconnected. See our speaker repair guide for removal.

The vibrating motor might be broken or disconnected. See our vibration motor repair guide for removal of the motor.

댓글 0개

조회 통계:

지난 24시간: 4

지난 7일: 7

지난 30일: 31

전체 시간: 2,272