주요 콘텐츠로 건너뛰기
도움말

현재 버전 작성자: mayer

제목:

Battery not charging after logic board install

텍스트:

Powerbook G4 17" 1.33
+Apple PowerBook G4 1.33 17" (Al) Specs
+
+Identifiers: 17-Inch 1.33/1.5 - M9110LL/A - PowerBook5,3 - A1052
+
I took a bit of a gamble on an ebay logic board for my powerbook 17" 1.33 laptop. All installed well or so I thought - now the battery wont charge, it doesn't drop it's charge either providing it's plugged in with the mains adapter. Here's what I've tried;
* reseting the PMU
* a different battery (also running coconutbattery app)
* quick Apple hardware test - everything passed
Here's my thoughts (I'd welcome yours);
Prior to the install I was confused by the thermal paste areas, I couldn't get a clear answer from my post (posted here and elsewhere earlier) so I ended up cleaning and applying arctic silver paste to the cpu, the power management unit and the gpu.
I wonder if the application of paste to the PMU was appropriate? It could be a bad connection - I'll open it up later and check the cables are properly seated.
It's definately not the adaptor or the batteries - I have two of both which I have tried and I know they are fine.
Comments appreciated
Thanks
ps; could be nothing but I'm noticing more static than before around the trackpad /speakers area.

기기:

PowerBook G4 Aluminum 17" 1-1.67 GHz

현황:

open

편집자: mayer

제목:

Battery not charging after logic board install

텍스트:

+Powerbook G4 17" 1.33
I took a bit of a gamble on an ebay logic board for my powerbook 17" 1.33 laptop. All installed well or so I thought - now the battery wont charge, it doesn't drop it's charge either providing it's plugged in with the mains adapter. Here's what I've tried;
* reseting the PMU
* a different battery (also running coconutbattery app)
* quick Apple hardware test - everything passed
Here's my thoughts (I'd welcome yours);
Prior to the install I was confused by the thermal paste areas, I couldn't get a clear answer from my post (posted here and elsewhere earlier) so I ended up cleaning and applying arctic silver paste to the cpu, the power management unit and the gpu.
I wonder if the application of paste to the PMU was appropriate? It could be a bad connection - I'll open it up later and check the cables are properly seated.
It's definately not the adaptor or the batteries - I have two of both which I have tried and I know they are fine.
Comments appreciated
Thanks
ps; could be nothing but I'm noticing more static than before around the trackpad /speakers area.

기기:

-Powerbook G4 17" 1.33
+PowerBook G4 Aluminum 17" 1-1.67 GHz

현황:

open

원본 게시물 작성자: Jim Cheatle

제목:

Battery not charging after logic board install

텍스트:

I took a bit of a gamble on an ebay logic board for my powerbook 17" 1.33 laptop. All installed well or so I thought - now the battery wont charge, it doesn't drop it's charge either providing it's plugged in with the mains adapter. Here's what I've tried;

* reseting the PMU

* a different battery (also running coconutbattery app)

* quick Apple hardware test - everything passed

Here's my thoughts (I'd welcome yours);

Prior to the install I was confused by the thermal paste areas, I couldn't get a clear answer from my post (posted here and elsewhere earlier) so I ended up cleaning and applying arctic silver paste to the cpu, the power management unit and the gpu.

I wonder if the application of paste to the PMU was appropriate? It could be a bad connection - I'll open it up later and check the cables are properly seated.

It's definately not the adaptor or the batteries - I have two of both which I have tried and I know they are fine.

Comments appreciated

Thanks

ps; could be nothing but I'm noticing more static than before around the trackpad /speakers area.

기기:

Powerbook G4 17" 1.33

현황:

open