To start with, your weakest link is going to be the Celeron processor. These are bottom of the barrel parts that fail most tests but are still good enough to be branded as a Celeron. A lot of features are disabled on these so they are not good for much. On top of this, they tend to show their age in 2-3 years since they are so low end. It's always going to be this way, unless you install a Pentium or Core i3 motherboard. The processor is soldered to the motherboard.
+
To start with, your weakest link is going to be the Celeron processor. These are the lowest end part you can get because they fail most tests but are r bad enough to scrap. On top of this they do not age as well as higher end chips. This will always be a weak point in your laptop since the processor is soldered.
-
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. The best thing you can do at this point is to use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature but if the processor runs cooler, it will turbo boost higher and throttle less often.
+
The first thing I'd look into is system throttling. Clean the dust and replace the thermal paste with a quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. If you still have performance issues I'd look at 2 other things.
-
While your options will be limited because you have the lowest end model, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
+
While your options are limited by the Celeron, installing more RAM will make a huge difference. This machine maxes out at 8GB of RAM because of the processor. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
-
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GBlockout for overprovisioning. You can find the WD Blue variant on [https://www.amazon.com/dp/B073SBZ8YH/ref=twister_B074R511LD?_encoding=UTF8&psc=1|Amazon] as well.
+
However, an SSD and RAM upgrade will do the most in terms of speeding the laptop up. This will easily cost more then the laptop is worth but it will improve the speed more then anything else in terms of hardware upgrades. For a drive I'd look at the WD Blue SSD or the SanDisk X600. Outside of the firmware lockout (6-12GB for the WD Blue) they're basically the same drive. The WD Blue is easier to find then the SanDisk as well.
-
If you can afford a better laptop I'd suggest considering it. The upgrades will cost about as much as a new laptop, even if you do it yourself.
+
If you can afford a better laptop I'd suggest considering it. While the suggestions I made will help they will likely cost as much as a better laptop.
To start with, your weakest link is going to be the Celeron processor. These are bottom of the barrel parts that fail most tests but are still good enough to be branded as a Celeron. A lot of features are disabled on these so they are not good for much. On top of this, they tend to show their age in 2-3 years since they are so low end. It's always going to be this way, unless you install a Pentium or Core i3 motherboard. The processor is soldered to the motherboard.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. The best thing you can do at this point is to use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature but if the processor runs cooler, it will turbo boost higher and throttle less often.
While your options will be limited because you have the lowest end model, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
-
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
+
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning. You can find the WD Blue variant on [https://www.amazon.com/dp/B073SBZ8YH/ref=twister_B074R511LD?_encoding=UTF8&psc=1|Amazon] as well.
If you can afford a better laptop I'd suggest considering it. The upgrades will cost about as much as a new laptop, even if you do it yourself.
To start with, your weakest link is going to be the Celeron processor. These are bottom of the barrel parts that fail most tests but are still good enough to be branded as a Celeron. A lot of features are disabled on these so they are not good for much. On top of this, they tend to show their age in 2-3 years since they are so low end. It's always going to be this way, unless you install a Pentium or Core i3 motherboard. The processor is soldered to the motherboard.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. The best thing you can do at this point is to use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature but if the processor runs cooler, it will turbo boost higher and throttle less often.
While your options will be limited because you have the lowest end model, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
+
+
If you can afford a better laptop I'd suggest considering it. The upgrades will cost about as much as a new laptop, even if you do it yourself.
To start with, your weakest link is going to be the Celeron processor. These are bottom of the barrel parts that fail most tests but are still good enough to be branded as a Celeron. A lot of features are disabled on these so they are not good for much. On top of this, they tend to show their age in 2-3 years since they are so low end. It's always going to be this way, unless you install a Pentium or Core i3 motherboard. The processor is actually soldered to the motherboard.
+
To start with, your weakest link is going to be the Celeron processor. These are bottom of the barrel parts that fail most tests but are still good enough to be branded as a Celeron. A lot of features are disabled on these so they are not good for much. On top of this, they tend to show their age in 2-3 years since they are so low end. It's always going to be this way, unless you install a Pentium or Core i3 motherboard. The processor is soldered to the motherboard.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. The best thing you can do at this point is to use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature but if the processor runs cooler, it will turbo boost higher and throttle less often.
While your options will be limited because you have the lowest end model, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. Use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature difference but if the processor runs cooler, it will turbo boost higher and throttle less often. It also won't magically fix the speed deficiency Celerons are known for.
+
To start with, your weakest link is going to be the Celeron processor. These are bottom of the barrel parts that fail most tests but are still good enough to be branded as a Celeron. A lot of features are disabled on these so they are not good for much. On top of this, they tend to show their age in 2-3 years since they are so low end. It's always going to be this way, unless you install a Pentium or Core i3 motherboard. The processor is actually soldered to the motherboard.
-
Since the processor is soldered and not upgradeable, this will ALWAYS be your weakest link. However, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
+
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. The best thing you can do at this point is to use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature but if the processor runs cooler, it will turbo boost higher and throttle less often.
+
+
While your options will be limited because you have the lowest end model, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. Use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature difference but if the processor runs cooler, it will turbo boost higher and throttle less often. It also won't magically fix the speed deficiency Celerons are known for.
-
-
If you really want to fix the problem, you will need to invest in more RAM and a new hard drive/SSD.
Since the processor is soldered and not upgradeable, this will ALWAYS be your weakest link. However, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. Use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature difference but if the processor runs cooler, it will turbo boost higher and throttle less often. It also won't magically fix the speed deficiency Celerons are known for.
If you really want to fix the problem, you will need to invest in more RAM and a new hard drive/SSD.
-
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job to fix the problem. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory and you can find memory on [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
+
Since the processor is soldered and not upgradeable, this will ALWAYS be your weakest link. However, a RAM upgrade will still give you a major performance bump. This machine maxes out at 8GB of RAM because of the processor it has. The memory can be purchased from most retailers or online at places like [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
-
However, if you really want to fix the problem the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
+
However, if you really want to fix the problem (and you can afford it), the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. While high performance thermal paste is overkill for a Celeron, it doesn't hurt anything. [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4 thermal paste]. This won't magically fix the speed deficiency Celerons naturally come with, but it may allow your computer to run at higher speeds and negate the problem to an extent.
+
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. Use a high quality paste like [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4]. In this application high performance thermal paste will offer little to no benefit in terms of temperature difference but if the processor runs cooler, it will turbo boost higher and throttle less often. It also won't magically fix the speed deficiency Celerons are known for.
If you really want to fix the problem, you will need to invest in more RAM and a new hard drive/SSD.
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job to fix the problem. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory and you can find memory on [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives. Just keep in mind you can only do so much here, because it's a Celeron. The problem is that Celeron processors are rejects that fail most tests but are not so damaged it's better to write them off. A lot of features that would be enabled on other processors are disabled under the Celeron brand. This allows Intel to make a "value" processor, but they don't age well - give it 2-3 years and the laptop begins to show it's age.
+
The first thing I'd look into is if the processor is throttling. I'd try cleaning the dust out of the heatsink and applying new thermal paste to the machine to help it run cooler. While high performance thermal paste is overkill for a Celeron, it doesn't hurt anything. [https://www.amazon.com/ARCTIC-Compound-Performance-Heatsink-Interface/dp/B0045JCFLY?th=1|Artic MX-4 thermal paste]. This won't magically fix the speed deficiency Celerons naturally come with, but it may allow your computer to run at higher speeds and negate the problem to an extent.
-
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory and you can find memory on [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
+
If you really want to fix the problem, you will need to invest in more RAM and a new hard drive/SSD.
+
+
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job to fix the problem. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory and you can find memory on [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives. Just keep in mind you can only do so much here, because it's a Celeron. The problem is that Celeron processors are rejects that fail most tests but are not so damaged it's better to write them off. A lot of features that would be enabled on other processors are disabled under the Celeron brand. This allows Intel to make a "value" processor, but they don't age well - give it 2-3 years and the laptop begins to show it's age.
-
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory.
+
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory and you can find memory on [https://www.amazon.com/Crucial-PC3-12800-Unbuffered-SODIMM-204-Pin/dp/B005LDLVAO/ref=sr_1_8?ie=UTF8&qid=1511379943&sr=8-8&keywords=8GB%2BDDR3L&th=1|Amazon].
However, if you really want to fix the problem the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives. Just keep in mind you can only do so much here, because it's a Celeron. The problem is that Celeron processors are rejects that fail most tests but are not so damaged it's better to write them off. A lot of features that would be enabled on other processors are disabled under the Celeron brand. This allows Intel to make a "value" processor, but they don't age well - give it 2-3 years and the laptop begins to show it's age.
-
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job. The first thing I'd try is a RAM upgrade - bring the machine up 16GB as a starting point. If you don't feel like you need it or 16GB is too expensive, look into an 8GB kit.
+
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job. The first thing I'd try is a RAM upgrade - bring the machine up 8GB of RAM, as this is the most the Celeron you have will accept. It uses DDR3L memory.
+
However, if you really want to fix the problem the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives.
+
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives. Just keep in mind you can only do so much here, because it's a Celeron. The problem is that Celeron processors are rejects that fail most tests but are not so damaged it's better to write them off. A lot of features that would be enabled on other processors are disabled under the Celeron brand. This allows Intel to make a "value" processor, but they don't age well - give it 2-3 years and the laptop begins to show it's age.
-
However, you can only do so much when you're talking about a Celeron without doing any upgrades IF you go this route. Celerons are more or less rejected parts that weren't bad enough to write off and are sold as a value chip with a lot of disabled features. It doesn't make them "bad" processors but they don't age very well. What's worse is it's soldered on your machine so you can't easily put a better processor like a Core i3 in without a new motherboard.
-
-
What I would do is start with the memory and bring the computer up to 16GB of RAM. If you think that's too expensive or your use case doesn't warrant it, an 8GB kit will suffice. This will help a lot, but will only go so far in the real world. The best thing you can do is to upgrade the machine to an SSD, as was suggested before. I would look into a 500GB (512GB class) WD Blue 3D NAND drive or purchase the business oriented SanDisk alternative since the WD Blue SSD's are SanDisk drives with a 6-12GB firmware lockout for over-provisioning.
+
Since the processor is soldered and not upgradeable, I'd replace the RAM and hard drive if you feel that cleaning it didn't do a good enough job. The first thing I'd try is a RAM upgrade - bring the machine up 16GB as a starting point. If you don't feel like you need it or 16GB is too expensive, look into an 8GB kit.
+
However, if you really want to fix the problem the best upgrade you can do is install an SSD. The drive and capacity you pick are up to you, but I would suggest looking at the WD Blue 3D NAND SSD's or the SanDisk X600. The main difference is the brand and available capacity - the X600 is fully unlocked while the WD Blue has a 6-12GB lockout for overprovisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives.
-
However, you can only do so much when you're talking about a Celeron without doing any upgrades IF you go this route. Celerons are more or less rejected parts that weren't bad enough to write off and are sold as a value chip with a lot of disabled features. It doesn't make them "bad" processors but they don't age very well.
+
However, you can only do so much when you're talking about a Celeron without doing any upgrades IF you go this route. Celerons are more or less rejected parts that weren't bad enough to write off and are sold as a value chip with a lot of disabled features. It doesn't make them "bad" processors but they don't age very well. What's worse is it's soldered on your machine so you can't easily put a better processor like a Core i3 in without a new motherboard.
What I would do is start with the memory and bring the computer up to 16GB of RAM. If you think that's too expensive or your use case doesn't warrant it, an 8GB kit will suffice. This will help a lot, but will only go so far in the real world. The best thing you can do is to upgrade the machine to an SSD, as was suggested before. I would look into a 500GB (512GB class) WD Blue 3D NAND drive or purchase the business oriented SanDisk alternative since the WD Blue SSD's are SanDisk drives with a 6-12GB firmware lockout for over-provisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives.
-
However, you can only do so much when you're talking about a Celeron without buying hardware upgrades. The Celeron is a chip that has been rejected because it has multiple die problems and most of the tech in the chip has been disabled when it was binned.
+
However, you can only do so much when you're talking about a Celeron without doing any upgrades IF you go this route. Celerons are more or less rejected parts that weren't bad enough to write off and are sold as a value chip with a lot of disabled features. It doesn't make them "bad" processors but they don't age very well.
What I would do is start with the memory and bring the computer up to 16GB of RAM. If you think that's too expensive or your use case doesn't warrant it, an 8GB kit will suffice. This will help a lot, but will only go so far in the real world. The best thing you can do is to upgrade the machine to an SSD, as was suggested before. I would look into a 500GB (512GB class) WD Blue 3D NAND drive or purchase the business oriented SanDisk alternative since the WD Blue SSD's are SanDisk drives with a 6-12GB firmware lockout for over-provisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives.
+
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste and remove the dust. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives.
However, you can only do so much when you're talking about a Celeron without buying hardware upgrades. The Celeron is a chip that has been rejected because it has multiple die problems and most of the tech in the chip has been disabled when it was binned.
What I would do is start with the memory and bring the computer up to 16GB of RAM. If you think that's too expensive or your use case doesn't warrant it, an 8GB kit will suffice. This will help a lot, but will only go so far in the real world. The best thing you can do is to upgrade the machine to an SSD, as was suggested before. I would look into a 500GB (512GB class) WD Blue 3D NAND drive or purchase the business oriented SanDisk alternative since the WD Blue SSD's are SanDisk drives with a 6-12GB firmware lockout for over-provisioning.
The first thing I'd look into is if the processor is throttling. Check for dust in the heatsink and if you see any (you probably will), take the fan and heatsink out and give the computer a fresh coat of thermal paste. That won't cure the problem 100% but it will make things manageable without spending hundreds of dollars on RAM and hard drives.
However, you can only do so much when you're talking about a Celeron without buying hardware upgrades. The Celeron is a chip that has been rejected because it has multiple die problems and most of the tech in the chip has been disabled when it was binned.
What I would do is start with the memory and bring the computer up to 16GB of RAM. If you think that's too expensive or your use case doesn't warrant it, an 8GB kit will suffice. This will help a lot, but will only go so far in the real world. The best thing you can do is to upgrade the machine to an SSD, as was suggested before. I would look into a 500GB (512GB class) WD Blue 3D NAND drive or purchase the business oriented SanDisk alternative since the WD Blue SSD's are SanDisk drives with a 6-12GB firmware lockout for over-provisioning.