I bought a broken PSVita on the used market with a mangeled charging port. The vita does not turn on or show any sign of live, but the outside is in great condition. I could buy a usb-C mod and install it, but before doing so, i want to check if the board is still functional, furthermore i want to check the battery voltage to check if the console would turn on, even with a new port and charging capability. Is this even the right way to go over this ( I checked with a multimeter on the black and red battery wire, but there is no voltage (22mV))? Or is there some board build into the battery? Thanks in advance and sorry for the bad english (Also i am new to repair, but have some soldering experience and a heat gun)
I bought a broken PSVita on the used market with a mangeled charging port. The vita does not turn on or show any sign of live, but the outside is in great condition. I could buy a usb-C mod and install it, but before doing so, i want to check if the board is still functional, furthermore i want to check the battery voltage to check if the console would turn on, even with a new port and charging capability. Is this even the right way to go over this ( I checked with a multimeter on the black and red battery wire, but there is no voltage (22mV))? Thanks in advance and sorry for the bad english (Also i am new to repair, but have some soldering experience and a heat gun)
+
I bought a broken PSVita on the used market with a mangeled charging port. The vita does not turn on or show any sign of live, but the outside is in great condition. I could buy a usb-C mod and install it, but before doing so, i want to check if the board is still functional, furthermore i want to check the battery voltage to check if the console would turn on, even with a new port and charging capability. Is this even the right way to go over this ( I checked with a multimeter on the black and red battery wire, but there is no voltage (22mV))? Or is there some board build into the battery? Thanks in advance and sorry for the bad english (Also i am new to repair, but have some soldering experience and a heat gun)
I bought a broken PSVita on the used market with a mangeled charging port. The vita does not turn on or show any sign of live, but the outside is in great condition. I could buy a usb-C mod and install it, but before doing so, i want to check if the board is still functional, furthermore i want to check the battery voltage to check if the console would turn on, even with a new port and charging capability. Is this even the right way to go over this ( I checked with a multimeter on the black and red battery wire, but there is no voltage (22mV))? Thanks in advance and sorry for the bad english (Also i am new to repair, but have some soldering experience and a heat gun)