주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

294 질문 전체 보기

iPhone screen is black but phone is working

My iphone 4 screen has gone black, but the phone is still working. I had the screen replaced last spring and it's been working fine since then. Today it goes black but is still working. I have not dropped it or anything, I just can't see anything. Does anyone have any ideas what has happened and what can I do to fix it? Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2

댓글:

My iphone 4 screen has gone black, but the phone is still working. I had the screen replaced last spring and it's been working fine since then. Today it goes black but is still working. I have not dropped it or anything, I just can't see anything. Does anyone have any ideas what has happened and what can I do to fix it? Thanks.

댓글 달기

답변 1개

선택된 해법

Melissa, before trying to purchase a new LCD, try to reset your phone. Hold the sleep/wake button at the top right and the home button at the same time. Keep holding until the screen go black. Sometime you have to keep holding even after the red power off slider appears. If it does, just keep holding it. Once the Apple logo appears let go of the buttons, your phone should now reboot. Always make sure that you back up your phone promptly so as to minimize any loss of important data. After you back it up you could also try a restore. If that does not accomplish anything, it may be time to disassemble your phone, check all the connectors, and then consider a new LCD.Hope this helps, good luck.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

it just worked for me woooohoooo

Thank you it just worked for me too after me googling this for the same problem!!

댓글 달기

귀하의 답변을 추가하세요

Melissa 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 11

전체 시간: 7,735