평판: 13
1
1
Good day to you folks ,
Where is the GYROSCOPE MODULE on N7100 ( GALAXY NOTE 2 ) Main board .
I have made many other attempt without success, Have someone repair the GYROSCOPE problem . I will be delighted to have his successful process posted.
Many thanks ..
좋은 질문 입니까?
평판: 782.4k
1.1k
893
2.3k
eldruige, the IC you are looking for is marked as U230. Check on that IC, sometimes you see the marking 330DC on it. 330dc is the unmarked STMicroelectronics LSM330DLC, which is the IC that the N7100 uses. The datasheet is available right here, the chip itself is available here, as well as many other places.
Hope this helps, good luck.
해당 답변은 도움이 되었습니까?
Top answer oldturkey.
평판: 32k
103
61
76
Have you tried to recalibrate the gyroscope in settings >motion >advanced settings >gyroscope calibration.
Also Having a screen protector can affect gyroscope operation for some reason.
Other things to try - backup and do a factory restore
해당 답변은 도움이 되었습니까?
I really appreciate your help , the recalibration and restore process was already done without success..the device still remain faulty
have a good day
Many thanks ,
loosen the screw nearest to the microsd card. it works on my phone
해당 답변은 도움이 되었습니까?
İyi günler hakan Bey; ekran dönmeme sorunu benim note 2de de var, dediğiniz gibi vidaları gevşetince düzeldi fakat zaman zaman telefon arka cepte baskı görünce tekrarlıyor; sanırım anakart üzerinde lehimlenmiş accelometre nin ayaklarından birinin bağlantısı cepte baskı görünce temas etmiyor. Buna bir çözümünüz var mı?
24 시간 전: 0
7일 전: 2
30일 전: 3
전체 시간: 13,619
댓글 3개
same problem here have anyone more shematics to locate a replace the gyro ship
thanks
Nounnouu Nidou 의
Same here any 1 help me
Md Rizwan 의
just loosen the screw that nearest to the micro sd card. it work on my phone
hakan ak 의