평판: 21
3
10
The computer will simply turn on, the LED light shining and the initial screen flicker.
I noticed that the vast majority of the water damage is around the RAM.
What do I need to do to get this thing running again?
좋은 질문 입니까?
평판: 8k
41
26
10
Try holding down Option and see what shows up, if anything.
Try putting the install DVD into the MacBook and as you start up, press and hold D
Is the LED light steady? or does it blink a certain amount of times?
해당 답변은 도움이 되었습니까?
평판: 13.3k
45
21
11
Remove the battery, power chord and topcase and let it dry. Remove the RAM and harddrive. Clean any suspected area with isopropyl alcohol. Don't use a blow dryer! Put everything back together and start it from the system disk - good luck.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 2
30일 전: 3
전체 시간: 1,197
댓글 1개
It has been cleaned with alcohol and no blow dryers. The LED light is steady. I'll do the other suggestions and update in a bit.
Michael Swenson 의