주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

295 질문 전체 보기
질문 마감됨

Phone not turning on, wire problem?

Okay so my phone was working perfectly except that the lock button was getting stuck so I went and opened up the phone to see if I can fix it. As I was taking the phone apart I was at the upper left side near the camera and unscrewed the 5 screws an unlatched that metal part and unlatched the the two wires that hold down the camera as I did this my phone shut off and reset so immediately reconnected everything but my phone won't turn on again. How do I fix this????

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Can u post a pic of the area of ur phone where u took it apart?

해당 답변은 도움이 되었습니까?

점수 0

댓글 4개:

Like the two wires and all that cuz I have the same phone, but I don't feel like taking it apart

Okay I took the photos but how do I add them haha??

In the bow labeled "add you answer" there's a blue icon. It should be right under the "add your answer" box. Click on it and there should be an option of uploading an image

It won't let me upload the picture but it's right in the upper left next to the camera.

댓글 달기

Yikes. Step one--never do any kind of work on a device without disconnecting the battery first!

My guess here is that your phone is probably powering on, just not showing a display because you lifted the LCD connector.

With the battery disconnected, gently lift, clean with alcohol, dry, then carefully and gently place the connectors back into place making sure they snap down. Re-insert battery, and then prompt phone to boot by inserting charging cable.

If you don't see the Apple logo, next step---see if phone is working but display is damaged.

Plug your phone into the computer, see if iTunes reconizes your phone--if so, this is a display issue. if not, this is a no power issue.

Report back your results.

jessa

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 69