기기를 수리하세요 커뮤니티 상점

PowerPC G5 프로세서를 사용하는 iMac G5는 2004년에 처음 출시되었습니다.

453 질문 전체 보기

옵션

iMac G5 with intermittent power on

Hi,

I have an iMac that starts up fine most of the time.

It can go for days working just fine.

When it fails, a push to the power button does NOTHING.

Inevitably, if I try enough times it works fine!

Any ideas?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Probably a failing power supply. To get you to the correct part we would need to know your exact machine. The power supply probably has to cool down before a restart. Open it up and look at where the power leads enter the power supply form the motherboard. If you see a burned area close by, you will know for sure. Opening up this one is usually a matter of three screws on the bottom of the frame. The part looks like this: [연계 제품이 누락 또는 비활성화 됨: IF165-002]

Here's how to get to the typical G5 iMac power supply:iMac G5 17" Model A1058 Power Supply Replacement

Again, check your model, it's located on the bottom of the stand.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

The iMac is a first generation 17" iMac and has no burned leads. It has a apple 661-3351 power supply.

You suspect the power supply, but when I run through apple's iMac test procedure,

http://support.apple.com/kb/ht2173

none of the buttons get the cool iMac to start up - when it's in failure mode (like today).

Do you still think it's the power supply?

의

댓글 달기

귀하의 답변을 추가하세요

bsmith1 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,076