평판: 25
1
I obtained a Fisher non-operable stereo amplifier model number RS-914A but I've noticed some of the capacitors were missing and possible other parts. I'm looking to rebuild it but need to know what parts are required so that I can purchase and apply them to the circuit board. I've looked everywhere online and I can't find anything helpful, so a part list would be majorly helpful.
좋은 질문 입니까?
평판: 782.4k
1.1k
893
2.3k
kevinkeyser96, here is a small start. Based on your images this is what I got so far:
C275 Capacitor 1000uF 35V
C276 Capacitor 1000uf 35V
C277 Capacitor 6800uF 75V
C278 Capacitor 6800uF 75V
those are electrolytic caps.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 1
30일 전: 3
전체 시간: 921
댓글 11개
you are looking at probably 2-300 parts. I suggest that you post images of your boards where the components are missing. It might be easier to identify it that way.
oldturkey03 의
How do I do that? I don't see an option for camera.
kevinkeyser96 의
기존 질문에 이미지 추가하기
oldturkey03 의
Okay, this is a start. Is there any chance you can get your images somewhat stabilized? The motion blurr makes it pretty much impossible to identify what is missing. Right now I can make out about 4 capacitors that have been removed. Take multiple close ups and see if you get the reference designators (numbers on the board) on the images. Looks like a pretty big job. Are you ready for all of this? Have you considered to replace the complete boards? I am all up for fixing things, but sometimes it's just to big of a chore. Just asking....
oldturkey03 의
Yea honestly it's just a hobby of mine :p I'll get those pictures up in just a bit
kevinkeyser96 의
댓글 6개 더보기