메인 콘텐츠로 스킵하기

모델 A1297 Unibody: 2009 상반기, 2009 중반기, 2010 중반기, 2011 상반기 & 2011 하반기

536 질문 전체 보기

Missing capacitor needs to be replaced

Hello my name is Sgt John P. Sunga - USMC. I recently acquired an early 2009 MacBook Pro 17". It was not booting up. After breakdown and cleanup and applying new thermal paste, I discovered one side of a tiny small capacitor broken off. When lined up proper, it boots up and everything works great. The caps was just barely hanging on and finally broke off. There are no markings on the caps but I took a picture of Where it is located. If anyone out there knows what type of cap and where to get it, that would be greatly appreciated.

Thanks,

John

Block Image

https://www.dropbox.com/sh/ma1d85a1p0d36...

The cap is located on the immediate left of resistor R7120. Below the missing cap looks like two identical caps that are mounted vertically.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

2개의 답변

선택된 해법

SgtJohnPSunga, thank you. The part that is missing is C7196 which is a 0.1UF 16V 10% capacitor in a 402 package. Available right here as well as many other places.

Update 09/03/2015

Location of C7771

Block Image

해당 답변은 도움이 되었습니까?

점수 1

댓글:

C7771 is a 330UF 2.0V 20% Poly Tant capacitor in a B2 case. Available right here as well as many other places.

의 답변

Thanks so much.m I didn't expect an a response this quickly, this really helps me out. Thanks again.

의 답변

의견 추가하세요
가장 유용한 답변

While this is open, since you are already soldering, replace C7771. Its time to die is coming.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

I'll go ahead and replace this as well. Is this the same cap?

의 답변

Where is the C7771 located?

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

SgtJohnPSunga 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 31

전체 시간: 1,814