평판: 73
3
1
I have changed a few ipad mini 2 screens, but this one i have tried x2 digitizers and although home button works fine, the touch screen doesnt work at all. I was working before with the cracked screen. Any ideas?
좋은 질문 입니까?
평판: 73
3
1
Hi Thanks for that. It looks like i have x5 copper pins missing (see image) do you think this is the cause and whats my next steps?
Thanks
ian
해당 답변은 도움이 되었습니까?
Totally repairable. Send out for digitizer fpc connector replacement. We do this every day. If you can't find someone local, we offer a mail in board repair service for people all over the world. Far less expensive than replacing the device. Look me up at iPad Rehab.
평판: 5.3k
9
15
4
Visually inspect where the digitizer plugs into the logic board. look for bent or missing gold pins. You may require magnification to inspect the area.
해당 답변은 도움이 되었습니까?
평판: 5.3k
9
15
4
Are you able to connect the old cracked screen to see if it still works? It's possible that the connector on the logic board is damaged , they are extremely fragile.
해당 답변은 도움이 되었습니까?
평판: 73
3
1
I could not as screen was totally smashed when removed. is there a way to check damage if its the connection on the logic board?
해당 답변은 도움이 되었습니까?
24 시간 전: 1
7일 전: 2
30일 전: 6
전체 시간: 319
댓글 1개
It was so bad that was not salvaged im afraid.
Ian Knight 의