주요 콘텐츠로 건너뛰기

MacBook, MacBook Pro 및 MacBook Air에 사용되는 AC 전원 어댑터. 잡아당길 때 안전하게 분리되는 자가-정렬 자성 커넥터를 사용합니다. 1 세대 (2006-2012) MagSafe 충전기는 약간 두꺼운 L 자형 커넥터가 있습니다. 45 W, 60 W 및 85 W 버전으로 제공됩니다.

76 질문 전체 보기

With a voltometer, should I get tone when touching both the leads?

60W MagSafe Power Adapter - And by leads, I mean the two ends of the wire in the cord that solder into the board inside the adapter case. I think that means the cord is shorted somewhere in-line, no? I have two boxes open, both broken in different ways (prior to opening up) and was hoping to Frankenstein together one working box, but if both cords are bum (one broken somewhere in-line and this one shorted somewhere in-line), then I may just have to buy a new one. (Or try to find the bad spot in the cord, but that's a bit more work than I had intended doing.)

However, knowing the cord is palindromic, would I get a "shorted" tone from touching the leads of the cord? (This is after removing it from the board, so it wouldn't be just because a short in the board.)

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

가장 유용한 답변

@greatcontagion check this guide for an explanation on how to check for continuity. Attach an image of which wire and where you are applying your test lead.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

GreatContagion 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 91