주요 콘텐츠로 건너뛰기

2.26 또는 2.4 GHz / 흰색 플라스틱 유니바디 인클로저

645 질문 전체 보기

Why is my MacBook freezing and heating up?

Hi,

My mid-2010 MacBook is starting to overheat, and according to the temperature sensors, the CPU is hitting 100+ degrees Fahrenheit. I ran the AHT, and it can't get past the RAM test without locking up. Is my heatsink damaged, or is the motherboard FUBAR?

Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

선택된 답변

Well if it can't get past the RAM test, that where I would start.

Update

Will it boot all the way up? It so go under the Apple to about this Mac> Memory and see if it is seeing what's installed. If it is not seeing all of it, reseat the RAM.

Next open it up and blow it out. If it is heavy on the dust, remove the fans and clean the vents. Here's how:

MacBook Unibody Model A1342 Fan Replacement

Now boot the Mac with the back off and insure that the fan is running.

If it is still running hot we need to look at the heat sink and thermal paste replacement. This model uses a liquid filled heat sink that can develop a leak. So when you go to replace the paste look on the logic board for traces of an oily looking stain. If you find it, replace the heat sink.

MacBook Unibody Model A1342 Heat Sink Replacement

How to Apply Thermal Paste

[연계 제품이 누락 또는 비활성화 됨: IF179-010]

Electronics Skills 이미지

안내서

How to Apply Thermal Paste

난이도:

운영

5 - 20 minutes

MacBook Unibody Model A1342 Fan 이미지

안내서

MacBook Unibody Model A1342 Fan Replacement

난이도:

운영

10 - 30 minutes

MacBook Unibody Model A1342 Heat Sink 이미지

안내서

MacBook Unibody Model A1342 Heat Sink Replacement

난이도:

어려움

15 - 30 minutes

해당 답변은 도움이 되었습니까?

점수 4

댓글 2개:

Well, how should I check it? Is there a program I can get to do it?

It sees all of the RAM. I've confirmed the fan is fully working, so I'll check the heatsink when I get a chance. Thanks!

댓글 달기

귀하의 답변을 추가하세요

Nikola Wozniak 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 6

전체 시간: 726