기기를 수리하세요 커뮤니티 상점

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1049 질문 전체 보기

옵션

Screen not firing up

Phone came into the shop yesterday and this could be bad

Unit seems to have no power and will not turn on

1. Tested Battery over half charged

2. Plug in charge cable Phone gets slightly warm after about 10mins charge

(normal and charging)

3. Changed Screen no change

4. Plugged into itunes itunes sees phone

5. Put on another screen (both new) no change

6. Checked main board no damage to connectors

Starting to get worried for this phone, anyone have any ideas ??

Cheers

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

have you tried power cycling the phone? pop the battery and press the power button then plug back in.

if that doesn't work you could have blown the backlight chip by changing screen without disconnecting the battery first.

rip the backlight off a working screen and shine a torch behind the lcd to confirm

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 3개:

Thanks for the quick answer, I new as soon as I posted this I should have mention rule 101. Isolate power source. Sorry.

Yes I did isolate the power source and i have disconnected the battery and retried to start the phone to no avail

의

no problem, next step is to tear the black backlight off the back of the screen you won't damage anything so don't be scared then you will be left with the lcd with you can shine a torch thru and see if the lcd is working

의

Ripped a good screen off one and no back light. Looking more like the Backlight circuit problem

의

댓글 달기
가장 유용한 답변

옵션

If iTunes recognizes your device and multiple screens don't work, then check the LCD with a flash light. If you see a dim image, then it sounds to me like you have a blown backlight circuit on the logic board. It's usually the filter but it can also be the rest of the circuit.

It's either the screen or the backlight circuit on the logic board. If you have access to a known-good screen, try that first. Otherwise, you will need to find a reputable shop that does micro-soldering.

해당 답변은 도움이 되었습니까?

예 아니요
점수 5

댓글 2개:

Thank you for your time, great help. That is why I like this forum. Working alone in a shop you don't always have the answers and it is great to "put it out there" To this great pool of knowledge

Thank you again

의

My pleasure!

if this answer solved your problem, please “Choose as Solution”. This allows people in the future to understand which answers helped solve the problem and adds value to the site. - Thanks

의

댓글 달기

귀하의 답변을 추가하세요

charlieclemett 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 72