평판: 685.3k
3.4k
1.1k
2.6k
I got in the capacitor kits, opened up a couple of different iMac G5 power supplies only to find them packed with gray silicon rubber adhesive. No wonder these things overheated. The question is: is there some easier way of getting this crude out other than cutting, picking and pulling?
좋은 질문 입니까?
평판: 783.8k
1.1k
894
2.3k
The only stuff that I know of is Acetone. Of course not sure how the electronic components and the PCB will hold out to that. 3M makes a product that the boaters down here use. It's a citrus based adhesive remover and they say it takes of the silicon adhesive used in boating. It's a sticky situation with the components but worth a try. Good Luck.
해당 답변은 도움이 되었습니까?
+ It's called ":goo gone", I'll give it a try and let you know
Thank you for accepting my answer and I hope you get the goo gone quickly.
평판: 78.2k
385
96
162
You could pick a small piece off and test alcohol and other safe solvents on it. You would be looking for a reaction that would allow you to peel the stuff off. Of course ideally it would dissolve. Good luck with it and plus for the question--never an easy answer.
해당 답변은 도움이 되었습니까?
+ for that. Isn't it cruel to waste the alcohol.
24 시간 전: 0
7일 전: 3
30일 전: 4
전체 시간: 767
