기기를 수리하세요 커뮤니티 상점

Furby was a popular electronic robotic toy resembling a hamster/owl-like creature which went through a period of being a "must-have" toy following its launch in the holiday season of 1998, with continual sales until 2000. Furbies sold 1.8 million units in 1998, 14 million units in 1999, and altogether in its three years of original production, Furbies sold over 40 million units.

85 질문 전체 보기

옵션

Why does my 1998 furby only work when I press on the bottom of it?

I bought an older furby off of eBay a while back and when I received the furby in the mail, it didn’t work unless I pressed on the head and base simultaneously. I took it apart and realized that if I pressed a certain corner of the circuit board it would work fine. Does anyone know how to fix this?

EDIT: I have added a picture of the corner that needs to be pressed.

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@smart932 that could be an indication of a colder solder or a broken trace. Post some images of your circuit board and mark where you need to squeeze to make it work. Use this guide 기존 질문에 이미지 추가하기 for that. It will allow us to see what you see.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Indeed, it's also the side were the battery wires are located, indicating a weak connection.

의

댓글 달기

귀하의 답변을 추가하세요

Jaz 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 107