해결됨: Ir and Siri stop working after screen replacement - iPhone SE

Ir and Siri stop working after screen replacement

Hello,

I’ve replaced the screen of my iPhone SE, everything is working except for the IR sensor (when I make a call the screen stays on) and Siri (I can’t speak to Siri, it seems she hear a continuous noise).

I’ve used a screen bought on iFixit, is it possible I’ve connected some cable in the wrong ways, or anything else?.

Could you please help me?

Thanks,

Marco

게시일: 2018년 9월 6일

옵션

Did the screen you ordered come with the front camera and sensor flex pre-installed? If so, it is possible that the flex was defective or damaged.

Start by verifying your connections to insure they are sitting properly in the connectors. Then take a closer look to see if there is any damage to the connectors or the flex cable. Finally, try transferring over you’re original Front Camera flex to see if that solves the problem.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 3개:

Hi, I've ordered https://eustore.ifixit.com/en/Parts/iPho...

so it seems to be complete of all parts.

I'll try to reopen and check if everithing is connected well, do you know which of the thee connectors is the one for the Ir sensor?

Thanks

Marco 의 2018년 9월 6일

Use the original flex of the broken screen. Sometimes those circuits that send with the screen do not work. That flex can prove the two problems that it comments.

iPhone SE Front Facing Camera and Sensor Cable Replacement

right vertical connector. Step 19

Oscar 의 2018년 9월 6일

Ok, thanks.

I'll try!

Marco 의 2018년 9월 6일

댓글 달기

iPhone SE

Ir and Siri stop working after screen replacement

답변 1개

귀하의 답변을 추가하세요