주요 콘텐츠로 건너뛰기

A baby monitor made by Infant Optics, Inc. The DXR-8 features a 3.5" screen , temperature sensor, night vision, and an interchangeable lens system.

22 질문 전체 보기

Night Vision Not Working

I had to turn off the breaker to my son’s room for electrical work, and ever since then the monitor shows a much darker picture. At night, you can’t even see the room at all! Does anyone have thoughts on how I can possibly fix this?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

My monitor is not working at night either. I can’t even see my daughter in her crib and the camera is mounted right above her. I don’t have the original receipt and I would love if I could fix it since it was one of the more expensive monitors.

의 답변

의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

5개의 답변

가장 유용한 답변

I don't know how, but it seems to be working again. We have the zoomed in lens and the company said to remove that and see if night vision works without the added lens. That didn't work. Tonight though I just turned the brightness basically all the way up and I can finally see an image! It's more grainy than normal, but I'll take that over a black screen. I also unplugged everything on the camera at one point, just in case that's something you haven't tried yet.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

It sounds like the near IR LED’s are not turning on. They should be glowing slightly in full darkness.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Thanks! I don't think we've checked that out. If they're not, is this a part that can be replaced, that you know of?

의 답변

Their might be a setting in the unit or the power logic got damaged from the power disruption.

의 답변

I really appreciate it! I was afraid it might have gotten damaged, so that might just be what happened. We do have the zoom in lens on the camera currently, thoughts to what might happen if we just use the standard lens that came with the unit?

의 답변

The lens does not have any bearing on the near IR LED's (8) that surround the lens.

의 답변

의견 추가하세요

Let me know if you figure this out because I’m having the same problem with my Infant Optics DXR-8.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Sounds like this is a common failure ;-{

I know enough to help guide you on what to look at from my experience with security cameras (which are basically the same).

I think you'll need to contact the company to see if they offer either a repair service or the electrical diagrams & schematics so you can trace out the logic and replace the damage components.

의 답변

의견 추가하세요

Our night vision stopped working 2 weeks ago. We never had a wide angle lens. All we see at night is a variable black and gray pixelated image. So disappointed in the company. They won’t give us a replacement or even fix it because we don’t have the original receipt (monitor was a shower gift) and we have been using it about 16 months.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

They wouldn't replace it without an original receipt for us too. Of course we didn't think to save it. Try unplugging everything, wait for a minute, and plug it back in. It was a few days before it started working again for us. So sorry!

의 답변

의견 추가하세요

We had the same problem today with both cameras for our Infant Optics DXR-8, but simply taking the battery out of the monitor for 10 minutes, then putting it back in, fixed it for us!!!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Jessica Glenn 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 51

지난 7일: 324

지난 30일: 1,470

전체 시간: 7,780