주요 콘텐츠로 건너뛰기

A high-end PC workstation by HP, released in April of 2012.

4 질문 전체 보기

Obtaining additional power for Graphics cards

I see that there is space for added graphics cards and appropriate slots. Is there some type of extra power cables near the graphics cards that would allow a GPU with added power requirement (6 or 8 pin power connector for card) to be added.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

What kind of power supply do you have: brand & model number. Most recent power supplies already have an extra output connector for graphics cards. Is it a modular supply? i.e., connectors plug into receptacles on the supply.

댓글 달기

답변 2개

가장 유용한 답변

Depending on which Z820 power supply you have there should already be 2 or 3 6-pin connectors available for powering GPUs. The unused 6-pin connectors will be held in a plastic bracket right behind the front fan assembly. If you need 8-pin power connectors then you will need to buy adapter cables. The HP power supply provides up to 18A power on each of the 6-pin connectors, so to be safe you should buy the HP 6-pin to 8-pin adapter versus no-name ones which mostly appear to be 18AWG and can only support up to 10A.

More info via the HP forums: https://h30434.www3.hp.com/t5/Business-P...

HP product link: http://www8.hp.com/us/en/products/oas/pr...

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

You can buy any atx power supply with a 6 or 8 pin connector. A few brands I like are EVGA, Seasonic and Corsair. Luckily, they are very affordable as well.

There are cables that convert molex to 6 and 8 pin connectors, but without knowing your power rating and the rails those connectors use I wouldn’t recommend them.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

This question is posed on the z820 repair thread. The HP z820 workstation uses a custom, proprietary power supply and the chassis will not support standard power supplies.

댓글 달기

귀하의 답변을 추가하세요

Mike Hall 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 16

전체 시간: 1,522