Reset to factory settings, can't connect to the internet

Question

HP Pavilion a400y

HP desktop PC. Shipped with a Socket 478 Celeron or Pentium 4. This motherboard will not take anything faster then a 533MHz FSB without throttling upgraded processors. This machine requires a new motherboard for a 800MHz FSB or higher processor.

2 질문 전체 보기

gemmac14@yahoo.com @gemm

평판: 13

1

게시됨: 2019년 6월 2일

옵션

Reset to factory settings, can't connect to the internet

I reset my HP presario desktop computer to factory settings, now i can't seem to connect to the internet. Before reset, it was connected to the internet. What could be the problem ?

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요

점수 1

댓글 달기

답변 1개

Dan A+ @dancomptia 평판: 2.4k 4 2 1 · Answer 1 · 2019-06-02T15:37:15-07:00

Dan A+ @dancomptia

평판: 2.4k

4

2

1

게시됨: 2019년 6월 2일

옵션

A few things might be wrong:

The full factory reset could have deleted your home’s WiFi password from your computer’s hard drive. This will cause the computer to be unable to automatically connect to your home’s WIFI. You may have to re-enter the password.
Your system may have been left in “airplane mode” after the reset. This will block all wireless connections to your computer. If there is a small airplane icon on the right of your Taskbar, please click on it and de-select the Airplane Mode option on the pop-up menu.
The driver for your Network Interface Card may have been reset to an earlier version. This will render the card unable to work properly. Please connect your computer to your router via an ethernet cable and update your NIC card.

이 답변이 도움이 되었나요?

예 아니요

점수 0

댓글 달기

HP Pavilion a400y

Reset to factory settings, can't connect to the internet

답변 1개

답변을 추가하세요

미리보기