옵션

Why is my new Crucial 8gb DDR3L 1600 UDIMM CL11 RAM not working

I own a Dell desktop Pc windows 10 64bit with Intel DH55HC motherboard that has Transcend 2gb DDR3 1333 DIMM CL9.

I recently bought a Crucial 8gb DDR3L 1600 UDIMM CL11, installed the module, but each time I start the pc, it would start perfectly till it shows the windows icon and the dotted loading icon, the shut off and the same thing would happen again. I've checked and Intel says my motherboard will support upto 16gb RAM but this one doesn't seem to work. I've also tried changing the BIOS settings a bit but the it still does the same thing.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 4개

Are you able to get one 8 GB SIMM to work?

Dan 의 2019년 11월 24일

No, I haven't tried because I would have to purchase it. Would it be advised to do do?

Buyile 의 2019년 11월 24일

Please tell us the actual model number of your machine.

mayer 의 2019년 11월 24일

Not certain I know which number that is. Please kindly elaborate

Buyile 의 2019년 11월 24일

댓글 달기

게시일: 2019년 11월 24일

옵션

@buyile you would need to tell us what settings in your BIOS you changed. The Transcend 2gb DDR3 1333 DIMM CL9 runs on 1.5V whereas your Crucial 8gb DDR3L 1600 UDIMM CL11 is a 1.35V module. Your chipset has also not been tested with a mix in module speed of greater than 1333MHz. So you can try to remove your Transcend memory and see if your BIOS settings allow you to take the memory configuration out of automatic, which could be trying to make it run at 1600 @ 1.35V and lock it in manual so it will always run 1333 @ 1.5V. It is possible that a BIOS update may fix this but ultimately I would get a module that is known to work and compatible with the one you have.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

RAM

Why is my new Crucial 8gb DDR3L 1600 UDIMM CL11 RAM not working

답변 1개

귀하의 답변을 추가하세요